Custom Search
Over 9,000 pages indexed!
|
| Your Host |
 KirtBlattenberger ... single-handedly redefining what an engineering website should be.
5CCG (5th
MOB): |
|
Hobby & Fun Airplanes and Rockets: Equine Kingdom: Doggy Dynasty: |
| ||||||
| ||||||
| Need small RF screened box with hinged lid for radio testing - RF Cafe Forums | ||||||
|
Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
Facebook page, please do.
Below are all of the forum threads, including all the responses to the original posts. Sylvanius Post subject: Need small RF screened box with hinged lid for radio testing Unread postPosted: Fri Jan 21, 2005 4:56 am Can anyone suggest where I may purchase an RF screened enclosure with the following basic spec:- Screening at 1GHz better than 60 dB Access to box via hinged door. At least one RF feed into box (Any type: BNC, N, SMC ETC) Size to be big enough to fit mobile phone size equipment in Thanks in advance Top Kirt Blattenberger Post subject: ETS-Lindgren Unread postPosted: Fri Jan 21, 2005 9:33 am Offline Site Admin User avatar Joined: Sun Aug 03, 2003 2:02 pm Posts: 308 Location: Erie, PA Greetings Sylvanius: You might want to take a look at ETS-Lindgren - http://www.ets-lindgren.com/product_Res ... 0Standards Agilent used to make a couple models, but I don't know if they make them any more. Edited 1/21/2005 @ 8:58 AM: I just checked and Agilent still makes the TS-50 RF test enclosure. I have used it a couple times and it is very good. http://cp.literature.agilent.com/litweb ... -6858E.pdf - Kirt Blattenberger :smt024 Top Profile Sylvarnius Post subject: Thanks Unread postPosted: Fri Jan 21, 2005 11:08 am Thanks for info lance Posted 11/12/2012 | ||||||
| ||||||
|
Please Support My Advertisers
|