Custom Search
Over 9,000 pages indexed!
|
| Your Host |
 KirtBlattenberger ... single-handedly redefining what an engineering website should be.
5CCG (5th
MOB): |
|
Hobby & Fun Airplanes and Rockets: Equine Kingdom: Doggy Dynasty: |
| ||||||
| ||||||
| Need Help with Bim2 Transceiver - RF Cafe Forums | ||||||
|
Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
Facebook page, please do.
Below are all of the forum threads, including all the responses to the original posts. macjo1 Post subject: Need Help with Bim2 Transceiver Unread postPosted: Tue Jan 04, 2005 9:57 am Offline Lieutenant Joined: Tue Jan 04, 2005 9:47 am Posts: 2 Hi, I am using a Radiometrix Transceiver to control an Alarm System. Can any1 help me with the use of the Bim2. I know that I have to send a preamble, followed by a start bit, then the data (Manchester Encoded), then a stop bit and CRC checksum. I am not sure how the start and stop bits work (i.e. does the transceiver use them or does the Microcontroller that I am using have to understand them?). Does all the data packet have to be Manchester Encoded or just the valid data? If any1 has any info or advice they could off I would be greatful. Posted 11/12/2012 | ||||||
| ||||||
|
Please Support My Advertisers
|