Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
page, please do.
Below are all of the forum threads, including all
the responses to the original posts.
Post subject: Mentor Expedition PCB --> PowerPCB Posted:
Wed Nov 09, 2005 1:34 am
Joined: Tue Nov 08,
2005 10:13 pm
Could anyone advice me
that what format could I export in the Mentor Expedition PCB software?
So, I could import it into the PowerPCB software? I have tried to export
the PCB in the Expedition software in .asc (ASCII) format and import
it in the PowerPCB. I found that there are some parts is missing shown
in the PowerPCB compared with the Expedition shown. Moreover, some parts
should be flood in the Expeditoin shown. There are not flood in the
PowerPCB. Therefore, could anyone suggest me to have a better export
format file in the Expedition. So, I could import it into the PowerPCB
and without so much error.