Custom Search
Over 9,000 pages indexed!
|
| Your Host |
 KirtBlattenberger ... single-handedly redefining what an engineering website should be.
5CCG (5th
MOB): |
|
Hobby & Fun Airplanes and Rockets: Equine Kingdom: Doggy Dynasty: |
| ||||||
| ||||||
| Measuring TDMA burst power - RF Cafe Forums | ||||||
|
Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
Facebook page, please do.
Below are all of the forum threads, including all the responses to the original posts. SPawn Post subject: Measuring TDMA burst power Unread postPosted: Wed May 11, 2005 3:24 am Hi all, sorry if I'll have English mistakes..... I have a little problem. I want to measure the output power of Cable Modem TDMA burst. Can anyone advise me how to perform this test? My solution so far is quite dubious - The Cable Model output is connected to Spectrum Analayzer input, the Spectrum Analayzer's video out is connected to scope for Trigger. A Vector Analyzer uses's this trigger to measure the burst.... Is there any other way for this test? Posted 11/12/2012 | ||||||
| ||||||
|
Please Support My Advertisers
|