Looking for a knid of glue - RF Cafe Forums
Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views. It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if you would like to post something on RF Cafe's Facebook page, please do.
Below are all of the forum threads, including all the responses to the original posts.
Post subject: Looking for a knid of glue Posted: Thu Oct 29, 2009 9:50 pm
Joined: Tue Nov 11, 2008 5:03 am
Location: Shanghai, China
I am looking for a knid of glue which can stick copper to steel of nickle plating finish, the glue should survive from -40C~+280C, and vibration per: 5Hz~9Hz Dis +/-3.5mm, and 9Hz~200Hz Acceleration 1g, sweep rate 1oct/min with duration 5sweep cycles/axis.
glad to learn from you
Post subject: Re: Looking for a knid of gluePosted: Sun Nov 15, 2009 12:28 am
Joined: Sun Aug 03, 2003 2:02 pm
Location: Erie, PA
Have you investigated J-B Weld? It has a very good reputation for bonding metals, although I do not know if it fits your exact specifications.
- Kirt Blattenberger
RF Cafe Progenitor & Webmaster
More than 10,000 searchable pages indexed.