Limiter design - RF Cafe Forums
Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views. It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if you would like to post something on RF Cafe's Facebook page, please do.
Below are all of the forum threads, including all the responses to the original posts.
Post subject: Limiter design Posted: Fri Oct 21, 2005 6:14 am
how to find the PIN diodes according to the known fequency? for example, my limiter is designed at 35GHz.
Post subject: LimiterPosted: Fri Oct 21, 2005 8:35 pm
PIN diode manufacturers publish detailed data sheets for their products. You have to read the data sheets or catalogs, either on-line or on paper, or find a directory or listing.
Most people just check with the device manufacturers - there aren't too many at 35 GHz.