Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
page, please do.
Below are all of the forum threads, including all
the responses to the original posts.
Post subject: Large signal loop gain? Posted: Wed Nov 30,
2005 5:17 pm
I am doing simulation on dynamic frequency
divider, I want to show the feed back loop large signal gain which should
be greater than unity when the input signal is present. I try to use
Oscport2, but it reuqires the setting of injected voltage. But in my
case I already have input siganl source, so I don't know how could I
deal with the injected frequency sweep setting.
I am confused
about how could I simulate the large signal loop gain, except Oscport2,
any other tools?Posted 11/12/2012