Homepage - RF Cafe
Webmaster: Kirt Blattenberger | KB3UON | Sitemap | ©1996-2014
Menu below is just a small sample of what is here!
 
Custom Search
More than 10,000 searchable pages indexed.
•−•  ••−•    −•−•  •−  ••−•  •
RF Cafe Morse Code >Hear It<

Digital Spread Spetrum Phone Mod? - RF Cafe Forums

Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views. It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if you would like to post something on RF Cafe's Facebook page, please do.

Below are all of the forum threads, including all the responses to the original posts.


Platonic
Post subject: Digital Spread Spetrum Phone Mod?
Unread postPosted: Mon Mar 28, 2005 7:20 pm
Offline
Lieutenant

Joined: Mon Mar 28, 2005 7:12 pm
Posts: 4
I've got two 900 MHz DSS (Freq. Hopping) cordless phones that I want to turn into short range radios. What I'd like to do is mod each one to put out at least 5 watts. The base of each phone would function as the transmitter while the paired handset would be the receiver.


Top
Profile

Platonic
Post subject:
Unread postPosted: Wed Mar 30, 2005 12:11 am
Offline
Lieutenant

Joined: Mon Mar 28, 2005 7:12 pm
Posts: 4
I think I need to ask a more specific question: Whar parts need to be replaced on the board to up the power to 5W? Where can I get a schematic for it or to modify it?


Top
Profile

Reality
Post subject:
Unread postPosted: Wed Mar 30, 2005 8:47 am

I hate to throw cold water on your idea here, but you do realize that the modification you are proposing is illegal per FCC rules, right? The cordless phone operate under FCC Part 15 unlicensed radiator regulations.


:(


Top


Guest
Post subject:
Unread postPosted: Wed Mar 30, 2005 4:25 pm

Reality wrote:
I hate to throw cold water on your idea here, but you do realize that the modification you are proposing is illegal per FCC rules, right? The cordless phone operate under FCC Part 15 unlicensed radiator regulations.


:(


Even if I'm a licensed amateur radio operator and the phone is going to be used in the 902-928 MHz range only?


Top


kpainter
Post subject:
Unread postPosted: Wed Mar 30, 2005 6:03 pm
Offline
Colonel
User avatar

Joined: Wed Aug 20, 2003 11:47 am
Posts: 47
Location: Santa Barbara, CA
Anonymous wrote:
Reality wrote:
I hate to throw cold water on your idea here, but you do realize that the modification you are proposing is illegal per FCC rules, right? The cordless phone operate under FCC Part 15 unlicensed radiator regulations.


:(


Even if I'm a licensed amateur radio operator and the phone is going to be used in the 902-928 MHz range only?


Yep, even if...


Top
Profile

Guest
Post subject:
Unread postPosted: Wed Mar 30, 2005 9:49 pm

Hummm, well I can build and operate experimental ham equipment of any kind as long as it doesn't interfere with other services so I don't understand how Part 15 devices are different. Just because they're certified by the FCC it makes them unmodifiable under any circumstances?


Top


Platonic
Post subject:
Unread postPosted: Wed Mar 30, 2005 9:52 pm
Offline
Lieutenant

Joined: Mon Mar 28, 2005 7:12 pm
Posts: 4
That was me I forgot to sign on!


Top
Profile

Guest
Post subject:
Unread postPosted: Wed Mar 30, 2005 10:47 pm

I take back what I said earlier. I shouldn't have originally phrased my response in a form of a question. Because as an amateur radio operator I should know that it's perfectly legal to do so. I was trying to be polite, but you took that to thinking that I'm bluffing. You forgot to take into consideration that I might be a new ham and I'm not aware of all these little laws and what not. The last thing we all need is another guy operating an RF transmitter illegally, I agree. But they're other ways to help people out than to lie to them about the legality of modding something just to brush them off because you think they were born yesterday.


Top


kpainter
Post subject:
Unread postPosted: Thu Mar 31, 2005 12:51 pm
Offline
Colonel
User avatar

Joined: Wed Aug 20, 2003 11:47 am
Posts: 47
Location: Santa Barbara, CA
Anonymous wrote:
I take back what I said earlier. I shouldn't have originally phrased my response in a form of a question. Because as an amateur radio operator I should know that it's perfectly legal to do so. I was trying to be polite, but you took that to thinking that I'm bluffing. You forgot to take into consideration that I might be a new ham and I'm not aware of all these little laws and what not. The last thing we all need is another guy operating an RF transmitter illegally, I agree. But they're other ways to help people out than to lie to them about the legality of modding something just to brush them off because you think they were born yesterday.


You make absolutely no sense. If you mod a phone to pound out 5 Watts in a band THAT IS REGULATED by Part 15, HOW are you going to know if you are or are not interferring with some one else? You are moving the burden of proof to the person you would be interferring with. The laws are in place specifically to cover people like you. But see, hams are not covered by FCC regulations, right?


Top
Profile

Guest
Post subject:
Unread postPosted: Thu Mar 31, 2005 3:49 pm

According to the HAM radio operators they can transmitt in any band. Let them try and transmit in the commercial FM and AM radio band and see how long it would take before someone comes knocking on their door. The existing cordless phones have low power for reason, NOT TO INTERFERE WITH YOUR NEIGHBOR.


Top


Guest
Post subject:
Unread postPosted: Thu Mar 31, 2005 3:53 pm

The last two posts make absolutely no sense.


Top


Guest
Post subject:
Unread postPosted: Thu Mar 31, 2005 3:55 pm

kpainter wrote:
Anonymous wrote:
I take back what I said earlier. I shouldn't have originally phrased my response in a form of a question. Because as an amateur radio operator I should know that it's perfectly legal to do so. I was trying to be polite, but you took that to thinking that I'm bluffing. You forgot to take into consideration that I might be a new ham and I'm not aware of all these little laws and what not. The last thing we all need is another guy operating an RF transmitter illegally, I agree. But they're other ways to help people out than to lie to them about the legality of modding something just to brush them off because you think they were born yesterday.


You make absolutely no sense. If you mod a phone to pound out 5 Watts in a band THAT IS REGULATED by Part 15, HOW are you going to know if you are or are not interferring with some one else? You are moving the burden of proof to the person you would be interferring with. The laws are in place specifically to cover people like you. But see, hams are not covered by FCC regulations, right?



It's regulated by part 15, but it's also regulated by part 97. In a ham’s case it supercedes part 15. It's a shared band, remember?


Top


Guest
Post subject:
Unread postPosted: Thu Mar 31, 2005 3:57 pm

Anonymous wrote:
kpainter wrote:
Anonymous wrote:
I take back what I said earlier. I shouldn't have originally phrased my response in a form of a question. Because as an amateur radio operator I should know that it's perfectly legal to do so. I was trying to be polite, but you took that to thinking that I'm bluffing. You forgot to take into consideration that I might be a new ham and I'm not aware of all these little laws and what not. The last thing we all need is another guy operating an RF transmitter illegally, I agree. But they're other ways to help people out than to lie to them about the legality of modding something just to brush them off because you think they were born yesterday.


You make absolutely no sense. If you mod a phone to pound out 5 Watts in a band THAT IS REGULATED by Part 15, HOW are you going to know if you are or are not interferring with some one else? You are moving the burden of proof to the person you would be interferring with. The laws are in place specifically to cover people like you. But see, hams are not covered by FCC regulations, right?



It's regulated by part 15, but it's also regulated by part 97. In a ham’s case it supercedes part 15. It's a shared band, remember?


Someone can buy you clue if you can't afford one!


Top


Guest
Post subject:
Unread postPosted: Thu Mar 31, 2005 3:58 pm

Anonymous wrote:
Anonymous wrote:
kpainter wrote:
Anonymous wrote:
I take back what I said earlier. I shouldn't have originally phrased my response in a form of a question. Because as an amateur radio operator I should know that it's perfectly legal to do so. I was trying to be polite, but you took that to thinking that I'm bluffing. You forgot to take into consideration that I might be a new ham and I'm not aware of all these little laws and what not. The last thing we all need is another guy operating an RF transmitter illegally, I agree. But they're other ways to help people out than to lie to them about the legality of modding something just to brush them off because you think they were born yesterday.


You make absolutely no sense. If you mod a phone to pound out 5 Watts in a band THAT IS REGULATED by Part 15, HOW are you going to know if you are or are not interferring with some one else? You are moving the burden of proof to the person you would be interferring with. The laws are in place specifically to cover people like you. But see, hams are not covered by FCC regulations, right?



It's regulated by part 15, but it's also regulated by part 97. In a ham’s case it supercedes part 15. It's a shared band, remember?


Someone can buy you clue if you can't afford one!


Double posts are nasty. I quoted myself in the last post.


Top


Kirt Blattenberger
Post subject:
Unread postPosted: Thu Mar 31, 2005 4:55 pm
Offline
Site Admin
User avatar

Joined: Sun Aug 03, 2003 2:02 pm
Posts: 308
Location: Erie, PA
I am no expert on the FCC, but I do believe the original poster is correct that HAM operators operating under Part 97 rules do trumph Part 15 unlicensed operators. Although malicious intentional interference could probably be prosecuted, there are multitudes of articles on the ARRL website and all over the Internet that discuss this issue. Here is a useful one to consider:

http://www.qrpis.org/~k3ng/ham_wisp.html

The tone of the thread could have gone in a more amicable direction if the original poster had stated up front that he is a HAM.


- Kirt Blattenberger :smt024


Top
Profile

kpainter
Post subject:
Unread postPosted: Thu Mar 31, 2005 8:44 pm
Offline
Colonel
User avatar

Joined: Wed Aug 20, 2003 11:47 am
Posts: 47
Location: Santa Barbara, CA
It would appear that the Ham operator's use of the spectrum does indeed superceed the public's use of part 15 devices. I particularly enjoyed the suggestion of what to do if you run into an amatuer radio operator who is jamming your cordless phone:

"Q: How can I avoid problems with Amateurs in my area ?
...

Hams love free Internet service and surplus gear, working or not. Use these tools when dealing with interference issues with hams.

"

Nice. :roll: I didn't know that bridery was an ARRL accepted method of conflict resolution - I guess so.


Top
Profile

Platonic
Post subject:
Unread postPosted: Fri Apr 01, 2005 10:52 pm
Offline
Lieutenant

Joined: Mon Mar 28, 2005 7:12 pm
Posts: 4
Kirt Blattenberger wrote:
I am no expert on the FCC, but I do believe the original poster is correct that HAM operators operating under Part 97 rules do trumph Part 15 unlicensed operators. Although malicious intentional interference could probably be prosecuted, there are multitudes of articles on the ARRL website and all over the Internet that discuss this issue. Here is a useful one to consider:

http://www.qrpis.org/~k3ng/ham_wisp.html

The tone of the thread could have gone in a more amicable direction if the original poster had stated up front that he is a HAM.


- Kirt Blattenberger :smt024



You're right about the tone of the thread. But, I was under the impression that people on these forums were here to trade technical information only. I'll be sure to state the fact I'm licensed when it warrants doing so.



Posted  11/12/2012
A Disruptive Web Presence

Custom Search
Over 10,000 pages indexed! (none duped or pirated)

Read About RF Cafe
Webmaster: Kirt Blattenberger
    KB3UON

RF Cafe Software

RF Cascade Workbook
RF Cascade Workbook is a very extensive system cascaded component Excel workbook that includes the standard Gain, NF, IP2, IP3, Psat calculations, input & output VSWR, noise BW, min/max tolerance, DC power cauculations, graphing of all RF parameters, and has a graphical block diagram tool. An extensive User's Guide is also included. - Only $35.
RF system analysis including
frequency conversion & filters

RF & EE Symbols Word
RF Stencils for Visio

Product & Service Directory
Personally Selected Manufacturers
RF Cafe T-Shirts & Mugs

RF Cafe Software

Calculator Workbook
RF Workbench
Smith Chart™ for Visio
Smith Chart™ for Excel
Your RF Cafe Progenitor & Webmaster
Click here to read about RF CafeKirt Blattenberger... single-handedly redefining what an
                                 engineering website should be.

View the YouTube RF Cafe Intro Video Carpe Diem! (Seize the Day!)

5CCG (5th MOB): My USAF radar shop

Airplanes and Rockets: My personal hobby website

Equine Kingdom: My daughter Sally's horse riding website