•−•  ••−•    −•−•  •−  ••−•  •
RF Cafe Morse Code >Hear It<

Job Board

About RF Cafe™

Sitemap

Components for 433MHz - RF Cafe Forums

Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views. It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if you would like to post something on RF Cafe's Facebook page, please do.

Below are all of the forum threads, including all the responses to the original posts.


SOFCBeta
Post subject: Components for 433MHz Posted: Thu Mar 06, 2008 11:01 am

Lieutenant

Joined: Wed Mar 05, 2008 4:52 pm
Posts: 1
Hi,
I am an ametuer antenna and RF enthusiast. I want to build my own six channel remote controller.
Should at least be having a range of 200mt.

Can any body suggest me Encoder decoder pairs and the corresponding RF transmitter and reciver components?

Prefer to operate at 433MHz.

Please suggest!
Thanks


Top

IR
Post subject: Posted: Thu Mar 06, 2008 8:15 pm

Site Admin


Joined: Mon Jun 27, 2005 2:02 pm
Posts: 373
Location: Germany
Hello SOFCBeta,

LINX Technologies have pair of transmitter and receiver operating for ISM 433MHz (And other frequencies as well).

Transmitter: TXE-433-KH
Receiver: RXD-433-KH2

Their website: www.linxtechnologies.com

Good luck!


Top

RFBites
Post subject: Posted: Sun Mar 23, 2008 6:41 pm

Lieutenant

Joined: Sun Mar 23, 2008 5:59 pm
Posts: 2
Location: Lafayette, CO
IR wrote:
Hello SOFCBeta,

LINX Technologies have pair of transmitter and receiver operating for ISM 433MHz (And other frequencies as well).

Transmitter: TXE-433-KH
Receiver: RXD-433-KH2

Their website: www.linxtechnologies.com

Good luck!



I have used LINX in the past, and they are okay. You might want to add some 270pF caps on the power supply lines (SRF at ~433MHz), and ESD protection on then antenna input, if you are going in mass production. If you are only building a couple modules, don't worry about it.

Cheers,

_________________
RF Bites
http://www.rfbites.com
Roll your own filter today!







Posted  11/12/2012
Custom Search
More than 10,000 searchable pages indexed.

Your RF Cafe
Progenitor & Webmaster

Click here to read about RF CafeKirt Blattenberger... single-handedly redefining what an engineering website should be.

View the YouTube RF Cafe Intro Video Carpe Diem!
(Seize the Day!)

5th MOB: My USAF radar shop

Airplanes and Rockets: My personal hobby website

Equine Kingdom: My daughter Sally's horse riding website