•−•  ••−•    −•−•  •−  ••−•  •
RF Cafe Morse Code >Hear It<

Job Board

About RF Cafe™

Sitemap

Bridge-T filter - RF Cafe Forums

Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views. It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if you would like to post something on RF Cafe's Facebook page, please do.

Below are all of the forum threads, including all the responses to the original posts.


2bitwise
Post subject: Bridge-T filter Posted: Tue Mar 06, 2007 2:51 pm

Lieutenant

Joined: Tue Mar 06, 2007 2:40 pm
Posts: 2
I need some basic design information on RF bridge-T trap filters. (equations, sample circuits)

I need a narrow, deep notch at VHF. I built series shunt traps but the -3db points were too wide. Good notch depth, though.

Also, to cascade traps, is there a low loss coupling method other than 1/4 wave coax sections?








Posted  11/12/2012
Custom Search
More than 10,000 searchable pages indexed.

Your RF Cafe
Progenitor & Webmaster

Click here to read about RF CafeKirt Blattenberger... single-handedly redefining what an engineering website should be.

View the YouTube RF Cafe Intro Video Carpe Diem!
(Seize the Day!)

5th MOB: My USAF radar shop

Airplanes and Rockets: My personal hobby website

Equine Kingdom: My daughter Sally's horse riding website