Bim2 Transceiver - RF Cafe Forums
Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views. It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if you would like to post something on RF Cafe's Facebook page, please do.
Below are all of the forum threads, including all the responses to the original posts.
Post subject: Bim2 Transceiver
Unread postPosted: Tue Jan 04, 2005 9:54 am
Joined: Tue Jan 04, 2005 9:47 am
I am using a Radiometrix Transceiver to control an Alarm System. Can any1 help me with the use of the Bim2.
I know that I have to send a preamble, followed by a start bit, then the data (Manchester Encoded), then a stop bit and CRC checksum.
I am not sure how the start and stop bits work (i.e. does the transceiver use them or does the Microcontroller that I am using have to understand them)?
If any1 has any info or advice they could off I would be greatful.
More than 10,000 searchable pages indexed.