Custom Search
Over 9,000 pages indexed!
|
| Your Host |
 KirtBlattenberger ... single-handedly redefining what an engineering website should be.
5CCG (5th
MOB): |
|
Hobby & Fun Airplanes and Rockets: Equine Kingdom: Doggy Dynasty: |
| ||||||
| ||||||
| AGC Amplifier circuit - RF Cafe Forums | ||||||
|
Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
Facebook page, please do.
Below are all of the forum threads, including all the responses to the original posts. Guest Post subject: [AGC Amplifier circuit] Unread postPosted: Mon Mar 07, 2005 8:20 pm Is there anybody know how I can design an AGC circuit with a pin attenuator at 5GHz for wireless lan ? Regards, Jimmy :-D Top Guest Post subject: AGC @ 5 GHz Unread postPosted: Sun Mar 13, 2005 10:22 pm Hi! A bit more information is necessary. Is this AGC in the Tx or the Rx path? If Rx, is there an IF signal point available? Or is it just the voltage variable attenuator you're asking about? Good Luck! Top Guest Post subject: RF AMP Unread postPosted: Sun Apr 10, 2005 1:41 am I am sorry for late response. I was away for a while. There is no IF signal now. I could use attenuator if possible. Jimmy :roll: Top Guest Post subject: Re: RF AMP Unread postPosted: Sun Apr 10, 2005 6:26 pm Guest wrote: I am sorry for late response. I was away for a while. There is no IF signal now. I could use attenuator if possible. Jimmy :roll: Who exactly are you rolling your eyes at? Posted 11/12/2012 | ||||||
| ||||||
|
Please Support My Advertisers
|