Custom Search
Over 9,000 pages indexed!
|
| Your Host |
 KirtBlattenberger ... single-handedly redefining what an engineering website should be.
5CCG (5th
MOB): |
|
Hobby & Fun Airplanes and Rockets: Equine Kingdom: Doggy Dynasty: |
| ||||||
| ||||||
| ADS simulation help - RF Cafe Forums | ||||||
|
Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
Facebook page, please do.
Below are all of the forum threads, including all the responses to the original posts. Mushi Post subject: ADS simulation Posted: Sun Apr 02, 2006 10:54 am Lieutenant Joined: Sun Apr 02, 2006 9:37 am Posts: 1 Hello, I need help with ADS. I'm a beginner…. I want to simulate isolation between 2 cables. Each cable is represented as RLC circuit. I'd like to inject sine wave into Port 1 and measure the signal at the adjacent cable. How can I do it? S-Parameter simulation? How? Or maybe AC simulation, name both ports Vin and Vout and use an equation? Thanks in advance. Andrei Top IR Post subject: Posted: Mon Apr 03, 2006 2:09 pm Site Admin Joined: Mon Jun 27, 2005 2:02 pm Posts: 373 Location: Germany Hello Andrei, To my understanding you can´t simulate isolation in the way you described. You will need to use a distributed model of coupled lines. There are several models available in ADS according ot the number of coupled lines and this is located under the TL library. To do that you have to model your cable as a distributed line, based on this model you can also define the distance between the lines and calculate the isolation (Coupling) between them. You can do it with linear (S-parameter) simulation and terminate to the unused ports. Hope it helps. _________________ Best regards, - IR Posted 11/12/2012 | ||||||
| ||||||
|
Please Support My Advertisers
|