Custom Search
Over 9,000 pages indexed!
|
| Your Host |
 KirtBlattenberger ... single-handedly redefining what an engineering website should be.
5CCG (5th
MOB): |
|
Hobby & Fun Airplanes and Rockets: Equine Kingdom: Doggy Dynasty: |
| ||||||
| ||||||
| ADS simulation error - RF Cafe Forums | ||||||
|
Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
Facebook page, please do.
Below are all of the forum threads, including all the responses to the original posts. dhruv_7126 Post subject: ADS simulation error Unread post Posted: Wed Feb 09, 2005 5:10 am Offline Lieutenant Joined: Wed Feb 09, 2005 4:55 am Posts: 2 hi, i am trying to build an Rf power amplifier at 2.14 GHz. Whenever I try to use the optimization tool along with 1-tone Harmonic Balance simulation, the simulator crashes stating - 'Simulator Terminated Abnormally'. I don't have any idea why it is happening? Can anyone tell me what could be causing it? Thank You, DHRUVIT PATEL Top Profile Guest Post subject: Use more tones Unread postPosted: Wed Feb 09, 2005 8:02 am I am not sure if this is your problem, but, if you are trying to perform a "Harmonic balance simulation" I think you should be using more than one tone. This may not be the cause of the problem, but even so, performing a one tone harmonic balance simulation will tell you nothing about the non-linear performance of the amplifier. Posted 11/12/2012 | ||||||
| ||||||
|
Please Support My Advertisers
|