Custom Search
Over 9,000 pages indexed!
|
| Your Host |
 KirtBlattenberger ... single-handedly redefining what an engineering website should be.
5CCG (5th
MOB): |
|
Hobby & Fun Airplanes and Rockets: Equine Kingdom: Doggy Dynasty: |
| ||||||
| ||||||
| How to Add Phase Noise from Two Sources? - RF Cafe Forums | ||||||
|
Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
Facebook page, please do.
Below are all of the forum threads, including all the responses to the original posts. KevinW Post subject: 2KW Notch Filter at 41.61MHz Posted: Wed Aug 05, 2009 11:59 am Lieutenant Joined: Wed Aug 05, 2009 11:40 am Posts: 1 Does anybody know where I could get a couple notch filters for putting in the transmit path to notch out the receive freq? The high power amp puts out 2KW. We have used DB Products tall cans in the past, but they are no longer around. I have looked all over the place on the Web without success. Telewave makes some that take 500W, but they are not interested in designing one for 2KW. Posted 11/12/2012 | ||||||
| ||||||
|
Please Support My Advertisers
|