Custom Search
More than 12,000 searchable pages indexed.

Your RF Cafe
Progenitor & Webmaster

Click here to read about RF CafeView the YouTube RF Cafe Intro VideoKirt Blattenberger ... single-handedly redefining what an engineering website should be.

Carpe Diem!
(Seize the Day!)

5th MOB:
My USAF radar shop

Airplanes and Rockets:
My personal hobby website

Equine Kingdom:
My daughter Sally's horse riding website

•−•  ••−•    −•−•  •−  ••−•  •
RF Cafe Morse Code >Hear It<

Job Board

About RF Cafe™


AWR, EAGLEWARE, ETC Which one ? - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues. Please visit the new and improved RF Cafe Forums that were created in September of 2015. Unlike with the old forums where users registered individually, the new forums use a common User Name and Password so anyone can post without needing to create an account. Please find the current User Name and Password on the RF Cafe homepage. Thanks for your participation.

Below are all of the old forum threads, including all the responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

 Post subject: AWR, EAGLEWARE, ETC Which one ?
Posted: Wed Jul 15, 2009 6:21 am 

Joined: Mon Feb 09, 2009 12:26 pm
Posts: 17
Until recently I have avoided using expensive and often unfriendly commercial design simulation software and instead used various free programs and mathcad routines / spreadsheets etc for such tasks as: Amplifier design and analysis, filters, matching, PLLs etc etc. This approach has served me quite well but there are occasions when I need a bit more than my cheap approach allows. Getting to the point of this question.....

Which design/analysis software is worth considering, and why? The two names that I seem to hear quite a bit are AWR and Eagleware. ????????


 Post subject: Re: AWR, EAGLEWARE,,,,,ETC Which one ?
Posted: Fri Mar 05, 2010 9:18 am 

Joined: Fri Mar 05, 2010 9:02 am
Posts: 1
It depends on what do u expect from the software.Genesys serves good synthesis tools i.e Matching network;Active/Passive/Microwave Filters;Oscillator , Mixer etc.AWR serves good EM simulator in addition to filter synthesis tools.I think Agilent ADS is best for both analysis and synthesis.If u want analysis software u can choose AWR but if u want synthesis software u can choose Genesys.

Posted  11/12/2012