|
| |
| |
| | meander line using cst simulation - RF Cafe Forums |
Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
Facebook page, please do.
Below are all of the forum threads, including all
the responses to the original posts.
| lee85 | Post subject: meander line using cst simulation Posted: Fri Dec 14, 2007 12:30 pm |
| | | | Captain |  |
Joined: Fri Dec 14, 2007 11:23 am
Posts: 9
Location: malaysia | hello everyone...
i am new with cst software. now i am doing to design meander line with dual sleeve with range 400-470MHz
the problem that i don't know how to draw the sma connector with the ground plane.....
so anyone can help me...
thanks
|
| | | |  |
| Feng | Post subject: Posted: Mon Dec 17, 2007 1:21 pm |
| | | | Captain |  |
Joined: Sun Mar 19, 2006 5:25 pm
Posts: 21
Location: Burnaby | Hi Lee85,
I have a paper about meander line antenna for mobile application. However, the operating bands mentioned are 900MHz, 1800MHz and 2.4GHz and it is written in Chinese. If you need it, I can send it for your.
|
| | | | |
| lee85 | Post subject: meander line using cst simulation Posted: Mon Dec 17, 2007 9:57 pm |
| | | | Captain | |
Joined: Fri Dec 14, 2007 11:23 am
Posts: 9
Location: malaysia | hi Feng thanks for the information yeah u can send email to kyg_ilham@yahoo.com n if u have in english also can thanks a lot regard lee85 
|
| | | | |
| Feng | Post subject: Posted: Mon Dec 17, 2007 11:43 pm |
| | | | Captain | |
Joined: Sun Mar 19, 2006 5:25 pm
Posts: 21
Location: Burnaby | Hi Lee85,
I've already sent it to your email box, you may check it later. Hope it is helpful for you.
|
| | | | |
| lee85 | Post subject: Posted: Mon Jan 14, 2008 12:35 pm |
| | | | Captain | |
Joined: Fri Dec 14, 2007 11:23 am
Posts: 9
Location: malaysia | Hi Feng,
thanks for the information....
now i am doing to design the meander line antenna but i have a few question
* do you use CST 2006 to design antenna before this?
if you use the cst may i know how to read the far-field result from simulation
in cst because i'am new with cst
thanks,
regards,
lee85
|
|
Posted 11/12/2012
| |
|
|
|
Kirt
