•−•  ••−•    −•−•  •−  ••−•  •
RF Cafe Morse Code >Hear It<

Job Board

About RF Cafe™

Sitemap

matlab for antenna simulation - RF Cafe Forums

Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views. It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if you would like to post something on RF Cafe's Facebook page, please do.

Below are all of the forum threads, including all the responses to the original posts.


 Post subject: matlab for antenna simulation
Posted: Wed Dec 14, 2005 6:38 pm 
 
Captain

Joined: Wed Dec 14, 2005 4:47 am
Posts: 9
hi freinds
i need program with matlab for antenna simulation that in first of program get "L" and give "E" and "H" and drawing "E" and "H" and get "f" and give antenna pattern 1D and 3D and get maximum input current (phase and amplitude) and give "radiated resistance" and directivity and drawing current of antenna . and if move feeder from middle of antenna to desire point all above parameters calculate again.
please guide me
thank you for your help


 
   
 
 Post subject:
Posted: Fri Dec 30, 2005 11:58 am 
http://rapidshare.de/files/9671739/Wile ... B.zip.html

This is the book for matlab


 
  
 
 Post subject:
Posted: Tue Jan 03, 2006 1:05 pm 
 
Captain

Joined: Wed Dec 14, 2005 4:47 am
Posts: 9
i have the program for this project but it is not full
and it has not " if move feeder from middle of antenna to desire point all above" i upload it 1.5kbyte
h**p://rapidshare.de/files/10323367/Antenna.m.html
please guide me for improve its
thanks


 
   
 
 Post subject:
Posted: Sat Jan 07, 2006 7:16 am 
 
Captain

Joined: Wed Dec 14, 2005 4:47 am
Posts: 9
i read book about matlab and of course Em modeling but this book"em modeling" is for professional purpose but i need elementry guide :HOW CAN WRITE PROGRAM WITH MATLAB if move feeder from middle of antenna to desire point all PARAMETERS FOR ANTENNA CALCULATED?
PLEASE GUIDE ME THAT IS VERY IMPORTANT
WITH THANKS FOR YOUR ATTENTION


 
   
 
 Post subject: hi
Posted: Wed Jan 18, 2006 10:13 am 
i need matlab program for patch antenna




Posted  11/12/2012
Custom Search
More than 10,000 searchable pages indexed.

Your RF Cafe
Progenitor & Webmaster

Click here to read about RF CafeKirt Blattenberger... single-handedly redefining what an engineering website should be.

View the YouTube RF Cafe Intro Video Carpe Diem!
(Seize the Day!)

5th MOB: My USAF radar shop

Airplanes and Rockets: My personal hobby website

Equine Kingdom: My daughter Sally's horse riding website