chip antenna question - RF Cafe Forums
Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
page, please do.
Below are all of the forum threads, including all
the responses to the original posts.
Post subject: chip antenna question
Posted: Tue Oct 04, 2005 5:08 am
Joined: Tue Oct 04, 2005
I am currently designing a zigbee sensor module
for my graduate project. I am planning to design
without a RF SPDT switch due to cost limitations.
That is, one antenna for Tx and one antenna for
Rx. Since chip antennas are dependent on the layout
of the board, are there any disadvantages in designing
two chip antennas in one board.
can help me out.
More than 10,000 searchable pages indexed.
Your RF Cafe
single-handedly redefining what an engineering website should be.
Progenitor & Webmaster
(Seize the Day!)
My USAF radar shop