•−•  ••−•    −•−•  •−  ••−•  •
RF Cafe Morse Code >Hear It<

Job Board

About RF Cafe™

Sitemap

Smart Antenna - Performance Analysis - RF Cafe Forums

Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views. It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if you would like to post something on RF Cafe's Facebook page, please do.

Below are all of the forum threads, including all the responses to the original posts.


 Post subject: Smart Antenna - Performance Analysis
Posted: Fri Nov 05, 2004 7:59 am 
I am a student. I have to simulate an adaptive smart antenna system, that is an adaptive antenna array, whose outputs are adaptively combined through a set of complex weights (signal amplitude and phase adjustments) to form a single output with beam steering interference mitigation capabilities. I have to show how the performance of an adaptive system is related to the DOA spread of multipath signals and the impact of the number of multipath on the performance of an adaptive antenna system. The simulated system has to be an optimum combining array with 8 omni-directional elements. I have to assume that there are 5 gaussian multipath signals. I have to show on the X axis the SNR at each antenna element and on the Y axis the bit error rate (BER) of coherent demodulation of BPSK at the array output. The variables that I have to inspected in the simulation are: number of elements, number of multipath, DOA (direction of arrival) spread, beamwidth of the directional antenna element and the number of element that will be chosen for beamforming process. I have to simulate two kinds of communication system: TDMA and CDMA. Bynary phase shift keying (BPSK) modulation is used in all simulation.I suppose flat rayleigh fading. There is an adaptive antenna array performance simulation software that may help me?


 
  
 
 Post subject: Re: Smart Antenna - Performance Analysis
Posted: Wed Mar 16, 2005 1:14 am 
smart antenna wrote:
I am a student. I have to simulate an adaptive smart antenna system, that is an adaptive antenna array, whose outputs are adaptively combined through a set of complex weights (signal amplitude and phase adjustments) to form a single output with beam steering interference mitigation capabilities. I have to show how the performance of an adaptive system is related to the DOA spread of multipath signals and the impact of the number of multipath on the performance of an adaptive antenna system. The simulated system has to be an optimum combining array with 8 omni-directional elements. I have to assume that there are 5 gaussian multipath signals. I have to show on the X axis the SNR at each antenna element and on the Y axis the bit error rate (BER) of coherent demodulation of BPSK at the array output. The variables that I have to inspected in the simulation are: number of elements, number of multipath, DOA (direction of arrival) spread, beamwidth of the directional antenna element and the number of element that will be chosen for beamforming process. I have to simulate two kinds of communication system: TDMA and CDMA. Bynary phase shift keying (BPSK) modulation is used in all simulation.I suppose flat rayleigh fading. There is an adaptive antenna array performance simulation software that may help me?




send me the algorithm and matlab code you are implementing to this id "prashanthvreddy@rediff.com"


 
  
 
 Post subject: Re: Smart Antenna - Performance Analysis
Posted: Wed Mar 16, 2005 1:18 am 
smart antenna wrote:
I am a student. I have to simulate an adaptive smart antenna system, that is an adaptive antenna array, whose outputs are adaptively combined through a set of complex weights (signal amplitude and phase adjustments) to form a single output with beam steering interference mitigation capabilities. I have to show how the performance of an adaptive system is related to the DOA spread of multipath signals and the impact of the number of multipath on the performance of an adaptive antenna system. The simulated system has to be an optimum combining array with 8 omni-directional elements. I have to assume that there are 5 gaussian multipath signals. I have to show on the X axis the SNR at each antenna element and on the Y axis the bit error rate (BER) of coherent demodulation of BPSK at the array output. The variables that I have to inspected in the simulation are: number of elements, number of multipath, DOA (direction of arrival) spread, beamwidth of the directional antenna element and the number of element that will be chosen for beamforming process. I have to simulate two kinds of communication system: TDMA and CDMA. Bynary phase shift keying (BPSK) modulation is used in all simulation.I suppose flat rayleigh fading. There is an adaptive antenna array performance simulation software that may help me?




send me the algorithm and matlab code you are implementing to this id "prashanthvreddy@rediff.com" .please send the algorithm in detail


Posted  11/12/2012
Custom Search
More than 10,000 searchable pages indexed.

Your RF Cafe
Progenitor & Webmaster

Click here to read about RF CafeKirt Blattenberger... single-handedly redefining what an engineering website should be.

View the YouTube RF Cafe Intro Video Carpe Diem!
(Seize the Day!)

5th MOB: My USAF radar shop

Airplanes and Rockets: My personal hobby website

Equine Kingdom: My daughter Sally's horse riding website