•−•  ••−•    −•−•  •−  ••−•  •
RF Cafe Morse Code >Hear It<
Job Board
About RF Cafe™
Copyright 1999-2015

RP-TNC/f calibration 50 Ohm load ? - RF Cafe Forums

Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views. It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if you would like to post something on RF Cafe's Facebook page, please do.

Below are all of the forum threads, including all the responses to the original posts.

 Post subject: RP-TNC/f calibration 50 Ohm load ?
Posted: Wed Jul 27, 2005 4:12 pm 

Joined: Wed Jul 27, 2005 3:19 pm
Posts: 2
Hi, I am trying to eliminate as many interconnections as possible to run SWR test of 2.4 GHz omnidirectional 'rubber-duck' WiFi antenna. I am using Agilent E5071B NA. Its port has N/f interface. Antenna has RP-TNC/f interface. My ideal situation would be to use just one N/m to RP-TNC/m adapter (I got one). I need to calibrate Network Analyzer with 50-Ohm Load, Short, Open with that adapter attached.

Does anybody know where can I get those calibration tools with RP-TNC/f interface? Do they exist? Is it possible to make them on my own?

Any ideas will be appreciated.

Posted  11/12/2012
Custom Search
More than 10,000 searchable pages indexed.

Your RF Cafe
Progenitor & Webmaster

Click here to read about RF CafeKirt Blattenberger... single-handedly redefining what an engineering website should be.

View the YouTube RF Cafe Intro Video Carpe Diem!
(Seize the Day!)

5th MOB: My USAF radar shop

Airplanes and Rockets: My personal hobby website

Equine Kingdom: My daughter Sally's horse riding website