Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
page, please do.
Below are all of the forum threads, including all
the responses to the original posts.
Post subject: Printed Yagi Simulation help (IE3D)
Posted: Sat Apr 29, 2006 9:08 am
Joined: Wed Apr 05, 2006 3:34 pm
I used IE3D to simulate the printed Yagi described at
"Unipolar wideband quasi yagi" article.
the result I got were not even close to those in the article!
can any of you have an idea why?
Posted: Tue Jun 20, 2006 1:10 pm
Joined: Thu Sep 29, 2005 1:20 pm
Location: Fremont, California, U.S.A