Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
page, please do.
Below are all of the forum threads, including all
the responses to the original posts.
Post subject: Need Help to design solid wide angle antenna for NLoS
Posted: Mon May 21, 2012 3:30 am
Joined: Mon May 21, 2012 2:23 am
New around here! I have a outdoor 2x2 MIMO WiFi radio which has dual linear x-polarization antenna ports and need to design a 90* sector antenna in 2.4GHz and 5.8GHz for solid wide angle coverage for outdoor to indoor coverage in Non-LoS mode to achieve max wall penetration.
The TX output power of this radio is 22dBm.
My question is: What should be the optimum design for this Antenna which can generate max solid angle horizontal and vertical solid angle coverage. Should the 3db dual linear H/V pattern be about 90*/25*? My object is to cover maximum floors and provide good wall penetration with least amount of APs generating max array and diversity gain? PLEASE HELP!