•−•  ••−•    −•−•  •−  ••−•  •
RF Cafe Morse Code >Hear It<
Job Board
About RF Cafe™
Copyright 1999-2015

Looking for help with HFSS9 - RF Cafe Forums

Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views. It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if you would like to post something on RF Cafe's Facebook page, please do.

Below are all of the forum threads, including all the responses to the original posts.

 Post subject: Looking for help with HFSS9
Posted: Wed Jan 12, 2005 9:46 am 

Joined: Wed Jan 12, 2005 9:34 am
Posts: 1
I am using HFSS to design a microstrip antenna. I have not too much experience with simulation program and I have problems with the definition of the ports. I am not sure which kind of ports are more suitable for my design because I need to look for at least 5 of the propagation modes and for example with a "lumped port" I can look only at one of them. :(

Have somebody of you experience in the definition of ports in microstrip structures and can give me a piece of advice to undestand how they work with HFSS?

Thank you very much :)


 Post subject:
Posted: Fri Feb 04, 2005 7:22 pm 
Well, All i knw is u have to use lumped port !!

 Post subject:
Posted: Mon Feb 07, 2005 3:24 pm 
u can go to www.ansoft.com and see in the HF archives.

Posted  11/12/2012
Custom Search
More than 10,000 searchable pages indexed.

Your RF Cafe
Progenitor & Webmaster

Click here to read about RF CafeKirt Blattenberger... single-handedly redefining what an engineering website should be.

View the YouTube RF Cafe Intro Video Carpe Diem!
(Seize the Day!)

5th MOB: My USAF radar shop

Airplanes and Rockets: My personal hobby website

Equine Kingdom: My daughter Sally's horse riding website