Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
page, please do.
Below are all of the forum threads, including all
the responses to the original posts.
Post subject: HDTV digital broadcast
Posted: Fri Oct 29, 2004 11:17 am
Two questions on digital broadcast.
When a digital signal is passed through a component or filter, what type of slope can a digital signal have in any 6MHz segment?
What would the minimum VSWR for a digital transmit be through the component or filter?
Any recommend lit on this topic?
Posted: Mon Nov 01, 2004 11:29 am
Joined: Mon Apr 12, 2004 4:50 pm
Location: South Florida
Are you talking about digital cable or digital broacast television?
What country is the system for?
Also, HDTV is term for the resolution of the picture. DTV it the term for American digital broadcast (8VSB) regardless of the information carried by the signal.
Post subject: Boradcast
Posted: Mon Nov 01, 2004 11:43 am
I would say both Off air broadcast and over cable..
I was told that an over the air digital channel:
Channel Bandwidth: 5.2MHz
Slope: +/- 1dB,...2dB max
I was not given the suggested return loss.
I am looking for confirmation or correction on this info.
It was suggested that there was a Texas Istrument article but I haven't been able to find it!
Thanks for any help!