Great problem - RF Cafe Forums
Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would
be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate
that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views.
It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if
you would like to post something on RF Cafe's
page, please do.
Below are all of the forum threads, including all
the responses to the original posts.
Post subject: Great problem
Posted: Mon Oct 31, 2005 4:40 pm
Joined: Mon Oct 31, 2005
Hi I have a problem with HFSS.I'm studying a ridged
conical horn using HFSS.I have drawn if and I have
drawn the box where I have put antenna.When I have
started simulation an error message appears
[warning] Solution Setup 'Setup1': Given the specified
frequency and model dimensions, an extremely large
mesh will be required to produce an accurate solution.
Your model and/or frequency units may be set incorrectly"
I have used a bandwidth that goes from 2 GHz
How can solve the problem?
Thanks and excuse me for my english,but
More than 10,000 searchable pages indexed.
Your RF Cafe
single-handedly redefining what an engineering website should be.
Progenitor & Webmaster
(Seize the Day!)
My USAF radar shop