•−•  ••−•    −•−•  •−  ••−•  •
RF Cafe Morse Code >Hear It<

Job Board

About RF Cafe™

Sitemap

Antenna array simulation with matlab - RF Cafe Forums

Because of the high maintenance needed to monitor and filter spammers from the RF Cafe Forums, I decided that it would be best to just archive the pages to make all the good information posted in the past available for review. It is unfortunate that the scumbags of the world ruin an otherwise useful venue for people wanting to exchanged useful ideas and views. It seems that the more formal social media like Facebook pretty much dominate this kind of venue anymore anyway, so if you would like to post something on RF Cafe's Facebook page, please do.

Below are all of the forum threads, including all the responses to the original posts.


 Post subject: Antenna array simulation with matlab
Posted: Thu May 19, 2005 9:27 am 
 
Lieutenant

Joined: Thu May 19, 2005 9:17 am
Posts: 1
Hallo everyone, I am new for this antenna area. I am trying to use matlab to write programmes the beam pattern of a rectangular array and circular array, but the figures look like different from the books. :cry: I don't know why. For example, the 3-D figure with azithmus angle and polar angle, how change them into x-y plan? Who is good at pragramming with matlab and could you give me some codes about that?

Your advice will be very appreciated. :)

_________________
Jenny


 
   
 
 Post subject:
Posted: Mon May 23, 2005 3:26 am 
Yes, you're right, it really is difficult to search a website:

http://www.rfcafe.com/business/bookstore/antennas.htm

Quite at the end is a book which deals about '"antennas and Matlab".


 
  
 
 Post subject:
Posted: Fri May 27, 2005 6:51 am 
Dear Jenny
why in the name of god you are using matlab to
design antennas.
try :cst microwave office
feko
ticra
ads
designer
qwed


 
  
 
 Post subject: antenna array design
Posted: Tue Oct 04, 2005 6:55 am 
Hello !

Plz, do you have some exemples of antenna array design using ADS or matlab ?
thx

oren wrote:
Dear Jenny
why in the name of god you are using matlab to
design antennas.
try :cst microwave office
feko
ticra
ads
designer
qwed


 
  
 
 Post subject:
Posted: Thu Oct 06, 2005 5:57 pm 
Try Makarov's book on antenna modeling using Matlab.






Posted  11/12/2012
Custom Search
More than 10,000 searchable pages indexed.

Your RF Cafe
Progenitor & Webmaster

Click here to read about RF CafeKirt Blattenberger... single-handedly redefining what an engineering website should be.

View the YouTube RF Cafe Intro Video Carpe Diem!
(Seize the Day!)

5th MOB: My USAF radar shop

Airplanes and Rockets: My personal hobby website

Equine Kingdom: My daughter Sally's horse riding website