Custom Search
More than 8,000 searchable pages indexed.

Your RF Cafe
Progenitor & Webmaster

Click here to read about RF CafeView the YouTube RF Cafe Intro VideoKirt Blattenberger ... single-handedly redefining what an engineering website should be.

Carpe Diem!
(Seize the Day!)

5th MOB:
My USAF radar shop

Airplanes and Rockets:
My personal hobby website

Equine Kingdom:
My daughter Sally's horse riding website

•−•  ••−•    −•−•  •−  ••−•  •
RF Cafe Morse Code >Hear It<

Job Board

About RF Cafe™

Sitemap

RF Schematic & Block Diagram Symbol Stencils for Visio™ - v1

Please review the newer release (RF Stencils for Visio - v2) that contains additional components and are also in color!

Use these Visio component stencils (also called shapes) to generate a professional looking system block diagram or schematic with as much - or as little - detail as you like.

 

Built on the Visio grid to guarantee alignment. All components are original.

The file size is nearly 1.5 MByte, so please be certain to provide an e-mail address that can accept this size attachment.

Only $15 for RF Components and Rack & Test Equipment
 and Tube Base Stencils and ARRL Symbols.

New in March 2008 - The Complete Set of Symbols Presented in the Front of the 2008 ARRL Handbook

Added in July 2008 - RF Connectors

This product has been tested with all versions of Visio 5.0 through 2007.

New! 2008 ARRL Handbook Symbols!
(included with the standard $15 purchase)

Visio Circuit Schematic Symbols from the 2008 ARRL Handbook

Sample Components

Notice: If you have purchased any version of these stencils, please send me an e-mail and I will send up an update that wraps all the available stencils into a single ZIP file.

Here is a small sample of what you will be receiving (more than 200). Note the consistent formatting. Most components include both a horizontal and a vertical orientation version. Edit values the same convenient way as with all other Visio components.

RF Stencils for Visio (Amp) - RF Cafe RF Stencils for Visio (Oscillator) - RF Cafe
RF Stencils for Visio (Attenuator) - RF Cafe RF Stencils for Visio (Transformer) - RF Cafe
RF Stencils for Visio (Bidirectional Coupler) - RF Cafe RF Stencils for Visio (Filter) - RF Cafe
RF Stencils for Visio (Diplexer) - RF Cafe RF Stencils for Visio (Power Combiner) - RF Cafe
 RF Stencils for Visio (Spectrum Analyzer) - RF Cafe RF Stencils for Visio (Power Supply) - RF Cafe
RF Stencils for Visio (Circulator) - RF Cafe RF Stencils for Visio (Opamp) - RF Cafe
RF Stencils for Visio (Transfer Switch) - RF Cafe RF Stencils for Visio (SPDT Switch) - RF Cafe
RF Stencils for Visio (Dummy Load) - RF Cafe RF Stencils for Visio (Waveguide Coupler) - RF Cafe
RF Stencils for Visio (Substrate Stackup) - RF Cafe
RF Stencils for Visio (Amplifiers) - RF Cafe
Amplifiers
RF Stencils for Visio (Antennas) - RF Cafe
Antennas
RF Stencils for Visio (Attenuators) - RF Cafe
Attenuators
RF Stencils for Visio (Ddata Converters) - RF Cafe
Data Converters
RF Stencils for Visio (Detectors) - RF Cafe
Detectors
RF Stencils for Visio (Discretes) - RF Cafe
Discretes
RF Stencils for Visio (Local Oscillators) - RF Cafe
Local Oscillators
RF Stencils for Visio (Mixers) - RF Cafe
Mixers
RF Stencils for Visio (Power Dividers) - RF Cafe
Power Dividers
RF Stencils for Visio (Waveguide) - RF Cafe
Waveguide
RF Stencils for Visio (Cables) - RF Cafe
Cables
RF Stencils for Visio (Switches) - RF Cafe
Switches
RF Stencils for Visio (Filters) - RF Cafe
Filters
RF Stencils for Visio (Couplers) - RF Cafe
Couplers
RF Stencils for Visio (test Equipment) - RF Cafe
Test Equipment
RF Stencils for Visio (Isolators / Circulators) - RF Cafe
Isolators/Circulators
RF Stencils for Visio (Substrates) - RF Cafe
Substrate Stack-up
RF Stencils for Visio (RF Connectors) - RF Cafe
RF Connectors
RF Stencils for Visio (1.4-Wave Antenna) - RF Cafe  

RF Stencils for Visio (Variable Attenuator) - RF Cafe

RF Stencils for Visio (Resistor) - RF Cafe  

RF Stencils for Visio (Inductor) - RF Cafe


How to open these stencils in Visio 2010?
** Make certain that the Color Themes are set to "None" **

RF Cafe - Opening stencils in Visiso 2010

 

In Visio 2013, you will probably need to change the File Block Settings that have been added in 2013 for security purposes. Please see the Microsoft support page for detailed instructions on File Block Settings (it's easy to do).

 

 

 

 

 

Newly Added Stencils